Radiation Health & SafetyCâu 19 / 100
Aluminum filtration is placed in the path of the x-ray beam in order to:
a.Restrict the size and shape of the beam
b.Increase the number of photons reaching the receptor
c.Remove low-energy, non-diagnostic photons that would be absorbed by the patient
d.Convert x-rays into visible light
Giải thích
Aluminum filters absorb long-wavelength, low-energy photons that cannot reach the receptor and would only be absorbed by the patient's skin, so filtration lowers patient dose. Restricting beam size and shape is the job of collimation, not filtration. Filtration reduces rather than increases photon numbers, and converting x-rays to light is the function of intensifying screens and phosphor plates.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Ionization occurs in tissue when:
- A receptionist who never operates x-ray equipment sits at a desk near the operatory wall. Which annual dose limit applies to her?
- Compared with D-speed film, direct digital sensors generally allow the operator to:
- According to the inverse square law, if the distance from the x-ray source to the receptor is doubled, the beam intensity at the receptor becomes:
- Most radiation damage in soft tissue happens indirectly. Which mechanism explains this indirect effect?
- A dental assistant informs the dentist that she is pregnant. Which approach reflects accepted radiation-protection practice?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với DANB Radiation Health & Safety (RHS) + Infection Control (ICE) Exams · Quy trình kiểm tra