EKG AcquisitionCâu 62 / 100
A tracing shows steady 60-cycle interference. Which troubleshooting sequence is most appropriate?
a.Increase the paper speed and reprint
b.Apply new electrodes and ask the patient to breathe deeply
c.Switch the machine to half standardization
d.Unplug nearby electrical equipment, move the cables away from power cords, verify the ground electrode, and confirm the patient is not touching metal
Giải thích
Sixty-cycle interference comes from surrounding alternating current, so the corrections are environmental: turn off or unplug nearby devices, separate the patient cable from power cords, verify a good ground electrode, and keep the patient from contacting the bed rails or other metal. Paper speed and standardization changes alter the display without removing the noise, and deep breathing worsens baseline wander rather than fixing interference.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A physician orders right-sided chest leads on a patient with a suspected right ventricular infarction. Which electrode position corresponds to V4R?
- A patient has a right below-the-knee amputation. How should the technician place the limb electrodes?
- When performing a 12-lead EKG on a female patient with large breast tissue, where should the V4 and V5 electrodes be placed?
- On a 12-lead tracing, leads I, II, and aVR are clean, but lead III alone shows an erratic, noisy trace. What is the most likely cause?
- A technician opens a package of disposable electrodes and finds the conductive gel is dry and crusted. What should be done?
- Before beginning a shift, a technician inspects the EKG machine. Which finding requires the machine be removed from service?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với NHA Certified EKG Technician (CET) Exam · Quy trình kiểm tra