Fixtures & Water HeatersCâu 64 / 120
Under the International Plumbing Code, what is the minimum clear space required in front of a water closet, measured from the front edge of the fixture to any wall or obstruction?
a.15 inches
b.21 inches
c.24 inches
d.30 inches
Giải thích
The IPC requires 21 inches of clear space in front of a water closet, lavatory, or bidet, although some jurisdictions and the UPC require 24 inches. 15 inches is the side clearance from the centerline, not a front dimension. 30 inches is the center-to-center spacing between two closets and has nothing to do with front approach space.
Trích dẫn luật: IPC §405.3.1Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A water closet is being roughed in against a side partition in a narrow alcove. Measuring from the finished face of the partition to the center of the closet outlet, what is the minimum dimension the model plumbing codes require?
- Two water closets are to be installed side by side in a school restroom. What is the minimum distance between the centerline of one closet and the centerline of the adjacent closet?
- A framed water closet compartment measures 32 inches wide inside the finished surfaces, and the closet is set exactly on the center of that width. Does the installation satisfy the side clearance requirement?
- A building owner replaces 40 old 3.5 gpf water closets with 1.28 gpf high efficiency models. If the fixtures are flushed a combined total of 2,000 times per day, how much water is saved per day?
- A storage type water heater is being installed. Which device must be provided on the tank to protect against both excessive temperature and excessive pressure?
- A temperature and pressure relief valve has a 3/4 inch outlet. Which discharge piping arrangement is acceptable?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với Journeyman Plumber Licensing Exam (UPC/IPC-based) · Quy trình kiểm tra