Gas & FuelCâu 69 / 110
A gas piping system must include a sediment trap (drip leg) ahead of certain appliances. What is the purpose and typical location of the drip leg?
a.To catch moisture and debris before it enters the appliance control, downstream of the appliance shutoff
b.To reduce pressure, at the meter
c.To vent gas, at the appliance
d.To bond the pipe, at the regulator
Giải thích
A sediment trap is a capped tee installed downstream of the appliance shutoff and ahead of the appliance control so moisture, scale, and debris drop into the leg instead of fouling the gas valve. It is required at most appliances except those specifically exempt such as ranges and clothes dryers in some codes. The leg must be accessible for cleaning.
Trích dẫn luật: IFGC §408.0Luyện miễn phí toàn bộ 110 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- During a gas pressure test, appliances and their regulators must be protected. What is the correct way to include or exclude appliances during a 10 psi test?
- A propane branch must deliver a 75,000 BTU/hr appliance at a longest length of 40 ft. Propane is 2,500 BTU/ft^3. The 40 ft table lists 1/2 in = 45 cfh and 3/4 in = 95 cfh. What is the required cfh and minimum pipe size?
- A hospital adds a nitrogen line for surgical tools alongside oxygen and medical air. What single feature most prevents a fatal mix-up of these medical/industrial gases at the outlet?
- Each gas appliance must have an accessible manual shutoff. Where must the appliance shutoff valve be located?
- Using the known-air-infiltration method, an appliance space of 10,000 ft^3 is credited with 0.35 air changes per hour of natural infiltration. How many cubic feet of infiltration air per hour does the space provide?
- A gas appliance vent connector runs 12 ft horizontally to the chimney. Code requires a minimum upward rise of 1/4 in per foot toward the chimney. What total vertical rise must the connector have?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với Master Plumber Licensing Exam (UPC/IPC-based) · Quy trình kiểm tra