DispensingCâu 69 / 100
To fit a frame that is too tight and leaves marks on the temples, the optician should do what?
a.Add pantoscopic tilt
b.Shorten the temples
c.Widen the temple spread or adjust the endpieces outward
d.Increase the base curve
Giải thích
When a frame grips the sides of the head too tightly, spreading the temples or adjusting the endpieces outward increases the temple width and relieves the pressure marks on the head.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Which patient complaint most suggests the PD was measured or set too wide?
- A photochromic lens is a poor choice for a patient who wants dark lenses primarily where?
- Anti-reflective coating is especially recommended for which patients?
- A patient with a strong Rx wants the thinnest possible lens. Besides high-index material, what frame choice helps most?
- For a progressive lens, insufficient seg/fitting height (frame too shallow) causes what problem?
- When dispensing polycarbonate, which coating is nearly always added and why?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với ABO (American Board of Opticianry) Certified Optician Exam · Quy trình kiểm tra