DispensingCâu 75 / 100
Which combination is generally problematic when dispensing?
a.Polycarbonate in a safety frame
b.A very high-plus lens in a large, rimless drill-mount frame
c.AR coating on a plastic lens
d.Photochromic in a full-rim frame
Giải thích
A very high-plus lens has thick, heavy edges poorly suited to a large rimless drill mount, which stresses the lens at drill points and looks bulky; a smaller full-rim frame is more appropriate.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- When dispensing polycarbonate, which coating is nearly always added and why?
- A patient reports objects appear tilted or the floor seems to slope with new glasses that have significant cylinder. This is most likely due to what?
- The vertical position for a general-wear D-segment bifocal is typically set at what landmark?
- To reduce a patient's eyes appearing magnified in a high-plus lens, the optician can recommend what?
- When adjusting metal nose pads to raise a frame on the face, the pads should be moved how?
- A patient's frame keeps sliding down despite tight nose pads. Besides the pads, which adjustment can help retention?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với ABO (American Board of Opticianry) Certified Optician Exam · Quy trình kiểm tra