Brakes (A5)Câu 52 / 120
A wheel-speed sensor signal that is missing on one wheel will most likely cause the ABS to:
a.Increase engine power
b.Set a code and disable ABS, reverting to normal braking
c.Lock all four wheels
d.Apply the parking brake
Giải thích
A lost wheel-speed signal sets a DTC and usually disables ABS, leaving conventional (non-anti-lock) braking available. The ABS warning lamp illuminates. Common causes include a damaged sensor, wiring, or a contaminated tone ring.
Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Technician A says a pulsating brake pedal is usually caused by air in the hydraulic lines. Technician B says it is usually caused by rotor thickness variation or excessive lateral runout. Who is correct?
- The primary purpose of a brake power booster is to:
- The main function of an anti-lock brake system (ABS) is to:
- Brake fluid is hygroscopic, which means it:
- During a disc brake job, a technician should measure rotor thickness and compare it to the:
- Technician A says brake shoes are used in disc brakes. Technician B says brake shoes are used in drum brakes. Who is correct?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với ASE Automobile Certification Series (A1–A8) · Quy trình kiểm tra