Railroad & SpecialCâu 41 / 80
After the bus has safely crossed the tracks, the driver should:
a.Continue smoothly and get fully clear of the crossing
b.Stop just past the rails to check students
c.Reverse to confirm the tracks are clear
d.Turn on the red loading lights
Giải thích
Once across, keep moving to get the entire bus completely clear of the crossing and out of any second track's path. Do not stop immediately past the tracks where the rear of the bus could still be in danger. Then resume normal driving.
Luyện miễn phí toàn bộ 80 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Placing the transmission in the correct gear before a crossing matters because:
- When stopped at a railroad crossing, the bus's hazard warning flashers should generally be:
- If a railroad crossing gate is down or lights are flashing, you must:
- A common misjudgment drivers make at crossings is that:
- The safest practice regarding stopping distance for a train is to remember that a train:
- A driver approaching a railroad crossing should turn off or reduce:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CDL School Bus (S) Endorsement Knowledge Test · Quy trình kiểm tra