Loading & UnloadingCâu 6 / 80
The outside left and right flat mirrors are mainly used to monitor:
a.The area directly in front of the bumper
b.Traffic and the sides and rear of the bus
c.The interior of the passenger compartment
d.The dashboard warning gauges
Giải thích
The outside flat mirrors are used to monitor traffic, check clearances, and see students along the sides and to the rear of the bus. They are mounted to give a view down the sides and behind. Convex mirrors, by contrast, are used for a wide-angle view of the danger zones close to the bus.
Luyện miễn phí toàn bộ 80 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- The most dangerous part of the school bus route for students is usually:
- When approaching a bus stop, you should activate your alternately flashing amber (yellow) warning lights:
- Before students board, the mirrors should be adjusted so that you can see:
- The convex mirrors on a school bus are used primarily to:
- The crossover mirrors (mounted at the front) are used to see:
- If a student drops something near the bus while crossing, you should teach them to:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CDL School Bus (S) Endorsement Knowledge Test · Quy trình kiểm tra