Loading & UnloadingCâu 8 / 80
The crossover mirrors (mounted at the front) are used to see:
a.The rear license plate
b.Overhead traffic signals
c.Your own reflection to check appearance
d.The front bumper area and the danger zone directly in front of the bus
Giải thích
Crossover mirrors are mounted on the front corners of the bus to let the driver see the front bumper area and the danger zone directly in front. This is where a small child crossing could be completely hidden below the windshield. They must be checked before pulling away from any stop.
Luyện miễn phí toàn bộ 80 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Before students board, the mirrors should be adjusted so that you can see:
- The outside left and right flat mirrors are mainly used to monitor:
- The convex mirrors on a school bus are used primarily to:
- If a student drops something near the bus while crossing, you should teach them to:
- When students must cross the road after leaving the bus, they should cross:
- Before allowing students to cross, the driver should:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CDL School Bus (S) Endorsement Knowledge Test · Quy trình kiểm tra