Loading & UnloadingCâu 11 / 80
Before allowing students to cross, the driver should:
a.Honk the horn twice
b.Open the door and look only at the students
c.Check all mirrors and make sure traffic in both directions has stopped
d.Rev the engine to warn traffic
Giải thích
The driver must scan all mirrors and confirm that traffic in both directions has come to a complete stop before signaling students to cross. Only when the road is clearly safe should the driver give the crossing signal. The driver keeps students in view the entire time they are crossing.
Luyện miễn phí toàn bộ 80 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- The crossover mirrors (mounted at the front) are used to see:
- If a student drops something near the bus while crossing, you should teach them to:
- When students must cross the road after leaving the bus, they should cross:
- You should count students at the stop and match them as they board and cross so that:
- After loading, before you move the bus you should:
- If you cannot account for a student who got off the bus, you should:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CDL School Bus (S) Endorsement Knowledge Test · Quy trình kiểm tra