Loading & UnloadingCâu 13 / 80
After loading, before you move the bus you should:
a.Recheck all mirrors, ensure all students are seated, and confirm the danger zone is clear
b.Immediately accelerate to merge with traffic
c.Turn off all lights and pull out
d.Sound the horn continuously
Giải thích
Before moving, do a final scan of all mirrors, verify every student is seated, and make sure the danger zone is completely clear of children. Only then release the parking brake and pull away slowly. A child returning for a dropped item is a common cause of loading-zone fatalities.
Luyện miễn phí toàn bộ 80 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- When students must cross the road after leaving the bus, they should cross:
- Before allowing students to cross, the driver should:
- You should count students at the stop and match them as they board and cross so that:
- If you cannot account for a student who got off the bus, you should:
- The red flashing lights and stop arm should be used:
- You should place the transmission in neutral (or park) and set the parking brake at a stop to:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CDL School Bus (S) Endorsement Knowledge Test · Quy trình kiểm tra