Loading & UnloadingCâu 15 / 80
The red flashing lights and stop arm should be used:
a.At every intersection
b.Whenever the bus is moving
c.When the bus is stopped to load or unload students on a roadway
d.Only in bad weather
Giải thích
Red flashing lights and the extended stop arm are activated when the bus is stopped to load or unload students on the roadway, requiring surrounding traffic to stop. They must not be used as a courtesy or at other times, which would confuse motorists. Follow your state law on when they are required.
Luyện miễn phí toàn bộ 80 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- You should count students at the stop and match them as they board and cross so that:
- After loading, before you move the bus you should:
- If you cannot account for a student who got off the bus, you should:
- You should place the transmission in neutral (or park) and set the parking brake at a stop to:
- When a student is approaching the bus at the stop and is late, you should:
- The 'unloading' procedure differs from loading mainly because:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CDL School Bus (S) Endorsement Knowledge Test · Quy trình kiểm tra