Loading & UnloadingCâu 16 / 80
You should place the transmission in neutral (or park) and set the parking brake at a stop to:
a.Save fuel
b.Cool the engine faster
c.Reduce tire wear
d.Prevent the bus from moving while students are loading or unloading
Giải thích
Setting the parking brake and putting the transmission in neutral or park prevents any accidental movement while children are in the danger zone. This protects students who are boarding, exiting, or crossing. Relying only on the service brake with your foot is not safe during loading.
Luyện miễn phí toàn bộ 80 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- After loading, before you move the bus you should:
- If you cannot account for a student who got off the bus, you should:
- The red flashing lights and stop arm should be used:
- When a student is approaching the bus at the stop and is late, you should:
- The 'unloading' procedure differs from loading mainly because:
- When students are walking to the bus stop along the road, they should walk:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CDL School Bus (S) Endorsement Knowledge Test · Quy trình kiểm tra