Loading & UnloadingCâu 18 / 80
The 'unloading' procedure differs from loading mainly because:
a.Fewer lights are needed
b.Students may need to cross and leave the danger zone, so you must confirm all are clear before moving
c.The stop arm is not used
d.Mirrors are unnecessary
Giải thích
During unloading, students exit and some must cross the road, so the critical step is confirming all students have moved out of the danger zone before you drive away. You must watch that every crossing student reaches the far side or curb. A miscount here is a leading cause of student fatalities.
Luyện miễn phí toàn bộ 80 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- The red flashing lights and stop arm should be used:
- You should place the transmission in neutral (or park) and set the parking brake at a stop to:
- When a student is approaching the bus at the stop and is late, you should:
- When students are walking to the bus stop along the road, they should walk:
- A 'post-trip inspection' of the bus interior is important to:
- If a vehicle fails to stop for your red flashing lights while students are crossing, you should:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CDL School Bus (S) Endorsement Knowledge Test · Quy trình kiểm tra