Network ImplementationCâu 28 / 100
Which routing protocol is a link-state interior gateway protocol that uses cost based on bandwidth as its metric?
a.RIP
b.OSPF
c.BGP
d.EIGRP
Giải thích
OSPF is a link-state interior gateway protocol that calculates the shortest path using a cost metric derived from link bandwidth. RIP uses hop count and BGP is a path-vector exterior protocol. OSPF converges faster than distance-vector protocols in large networks.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Which technology allows a switch to supply electrical power to devices such as IP phones and access points over the data cable?
- When implementing inter-VLAN routing on a single router interface, what configuration is required?
- A wireless network must support the highest client density in a crowded office. Which deployment choice best reduces co-channel interference on 2.4 GHz?
- An engineer configures a static route of last resort. Which destination and mask represent the default route?
- Which protocol prevents Layer 2 switching loops by placing redundant links into a blocking state?
- A technician needs to connect two buildings 800 meters apart with high bandwidth and immunity to electromagnetic interference. Which medium is best?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CompTIA Network+ (N10-009) · Quy trình kiểm tra