Network ImplementationCâu 30 / 100
Which protocol prevents Layer 2 switching loops by placing redundant links into a blocking state?
a.Spanning Tree Protocol
b.Border Gateway Protocol
c.Hot Standby Router Protocol
d.Network Time Protocol
Giải thích
Spanning Tree Protocol (STP) detects redundant Layer 2 paths and blocks them to prevent broadcast storms and switching loops. If an active link fails, a blocked link can transition to forwarding. STP is essential in networks with redundant switch links.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A wireless network must support the highest client density in a crowded office. Which deployment choice best reduces co-channel interference on 2.4 GHz?
- Which routing protocol is a link-state interior gateway protocol that uses cost based on bandwidth as its metric?
- An engineer configures a static route of last resort. Which destination and mask represent the default route?
- A technician needs to connect two buildings 800 meters apart with high bandwidth and immunity to electromagnetic interference. Which medium is best?
- Which addressing technique allows many internal private hosts to share a single public IP address for internet access?
- When configuring a trunk between two switches, which VLAN carries untagged traffic by default?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CompTIA Network+ (N10-009) · Quy trình kiểm tra