Network ImplementationCâu 35 / 100
A network requires automatic failover of the default gateway between two routers. Which category of protocol provides this?
a.Link aggregation protocol
b.Spanning tree protocol
c.Address resolution protocol
d.First hop redundancy protocol
Giải thích
First hop redundancy protocols such as HSRP, VRRP, and GLBP provide a virtual gateway IP shared by multiple routers for automatic failover. If the active router fails, a standby takes over transparently to hosts. This eliminates the gateway as a single point of failure.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Which addressing technique allows many internal private hosts to share a single public IP address for internet access?
- When configuring a trunk between two switches, which VLAN carries untagged traffic by default?
- Which wireless security standard introduces Simultaneous Authentication of Equals (SAE) to replace the pre-shared key handshake?
- Which technology bundles multiple physical links into one logical link to increase bandwidth and provide redundancy between switches?
- An administrator assigns 192.168.1.0/24 but needs subnets of varying host sizes. Which technique allows different subnet mask lengths within the same address block?
- Which DHCP component defines the range of IP addresses a server can lease to clients?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CompTIA Network+ (N10-009) · Quy trình kiểm tra