Network ImplementationCâu 36 / 100
Which technology bundles multiple physical links into one logical link to increase bandwidth and provide redundancy between switches?
a.VLAN trunking
b.Link aggregation (LACP)
c.Port mirroring
d.Spanning tree
Giải thích
Link aggregation, often using LACP (802.3ad), combines several physical ports into a single logical link for greater bandwidth and redundancy. If one member link fails, traffic continues over the others. It is commonly used on switch uplinks and server connections.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- When configuring a trunk between two switches, which VLAN carries untagged traffic by default?
- Which wireless security standard introduces Simultaneous Authentication of Equals (SAE) to replace the pre-shared key handshake?
- A network requires automatic failover of the default gateway between two routers. Which category of protocol provides this?
- An administrator assigns 192.168.1.0/24 but needs subnets of varying host sizes. Which technique allows different subnet mask lengths within the same address block?
- Which DHCP component defines the range of IP addresses a server can lease to clients?
- A technician must extend a wired network into an area where running new cable is impractical. Which device bridges two network segments over the existing electrical wiring?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CompTIA Network+ (N10-009) · Quy trình kiểm tra