Network ImplementationCâu 40 / 100
Which SDN plane is responsible for making forwarding decisions and building the network's logical topology?
a.Data plane
b.Management plane
c.Physical plane
d.Control plane
Giải thích
In software-defined networking, the control plane makes forwarding decisions and maintains the logical topology, then programs the data plane. Separating these planes centralizes intelligence in an SDN controller. The data plane simply forwards packets based on control-plane instructions.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- An administrator assigns 192.168.1.0/24 but needs subnets of varying host sizes. Which technique allows different subnet mask lengths within the same address block?
- Which DHCP component defines the range of IP addresses a server can lease to clients?
- A technician must extend a wired network into an area where running new cable is impractical. Which device bridges two network segments over the existing electrical wiring?
- An engineer configures a switch port that should immediately transition to forwarding for a single end host. Which STP feature is appropriate?
- Which type of NAT maps one private IP address to one dedicated public IP address permanently?
- Which Layer 3 switch feature provides a virtual interface used to route traffic for a VLAN without a separate router?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CompTIA Network+ (N10-009) · Quy trình kiểm tra