Networking ConceptsCâu 7 / 100
Which IPv6 address type begins with the prefix FE80::/10 and is used only for communication on the local link?
a.Link-local
b.Global unicast
c.Anycast
d.Multicast
Giải thích
Link-local IPv6 addresses use the FE80::/10 prefix and are auto-configured on every interface for local-link communication. Global unicast addresses are routable on the internet, while multicast uses FF00::/8. Link-local addresses are never routed beyond the local segment.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- What is the default port used by the Domain Name System (DNS) for standard name resolution queries?
- An engineer must choose an address class for a private network that supports up to 500 hosts on a single subnet. Which private range is most appropriate to draw from?
- How many usable host addresses are available in a subnet with a /29 prefix?
- A star topology relies on which central device to interconnect all end nodes?
- Which cabling standard defines the maximum supported distance of 100 meters for a twisted-pair Ethernet run?
- What is the primary purpose of a VLAN in a switched network?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CompTIA Network+ (N10-009) · Quy trình kiểm tra