Networking ConceptsCâu 9 / 100
Which cabling standard defines the maximum supported distance of 100 meters for a twisted-pair Ethernet run?
a.1000BASE-LX
b.10GBASE-ER
c.100BASE-FX
d.1000BASE-T
Giải thích
1000BASE-T runs over twisted-pair copper and is limited to 100 meters per segment. The other options are fiber standards that support much longer distances. The 100-meter copper limit includes patch cords and horizontal cabling.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- How many usable host addresses are available in a subnet with a /29 prefix?
- Which IPv6 address type begins with the prefix FE80::/10 and is used only for communication on the local link?
- A star topology relies on which central device to interconnect all end nodes?
- What is the primary purpose of a VLAN in a switched network?
- Which protocol resolves an IPv4 address to a MAC address on a local Ethernet segment?
- A company wants clients to obtain IP configuration automatically. Which protocol assigns addresses, subnet masks, gateways, and DNS servers dynamically?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CompTIA Network+ (N10-009) · Quy trình kiểm tra