Network TroubleshootingCâu 92 / 100
A pair of switch ports negotiated a duplex mismatch. Which symptom is most characteristic of this condition?
a.Complete loss of link
b.APIPA addressing
c.Late collisions and slow throughput
d.DNS resolution failures
Giải thích
A duplex mismatch, where one side is full and the other half duplex, typically causes late collisions, frame errors, and poor throughput rather than a total link failure. Setting both ends to the same duplex, or both to autonegotiate, resolves it. Late collisions on a full-duplex link are a telltale sign.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Which command tests basic reachability to a remote host by sending ICMP echo requests?
- An access switch port connected to a PC keeps going into an err-disabled state. Which security feature most likely triggered this?
- Intermittent connectivity affects devices only during business hours, correlating with heavy equipment operation nearby. Which cabling issue is the likely culprit?
- After confirming a fix resolves the reported issue, which troubleshooting step should be performed next?
- A technician suspects a specific cable among many in a bundle. Which tool pair helps locate and identify that individual cable?
- A server's throughput is far below the link's rated speed, and interface counters show many output drops during peak traffic. What is the likely cause?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CompTIA Network+ (N10-009) · Quy trình kiểm tra