Core TradesCâu 156 / 700
A roof has a total surface area of 2,000 square feet. Adding a 15% allowance for waste, hips, and starter courses, how many roofing squares should be ordered?
a.20 squares
b.21.5 squares
c.25 squares
d.23 squares
Giải thích
2,000 square feet equals 2,000 / 100 = 20 squares of net area. Adding 15% for waste: 20 x 1.15 = 23 squares. 20 squares ignores waste; 21.5 uses about 7.5% instead of 15%; 25 overstates the allowance.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A simple gable roof has two identical planes, each measuring 40 ft along the ridge by 18 ft up the slope. How many roofing squares of material cover the roof (before waste)?
- In an open valley on a shingle roof, metal valley flashing is installed primarily to:
- A drip edge at the eaves and rakes of a shingle roof functions primarily to:
- The R-value of an insulation material is a measure of its:
- In a heating-dominated (cold-winter) climate, a vapor retarder in an exterior wall is generally installed on which side of the insulation?
- Under current California Energy Code prescriptive requirements, wood-framed ceiling/attic insulation in most climate zones must reach a MINIMUM of about:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra