Core TradesCâu 154 / 700
In an open valley on a shingle roof, metal valley flashing is installed primarily to:
a.Hold the shingles down against wind uplift
b.Channel concentrated water runoff and prevent leaks where two roof planes meet
c.Ventilate the attic space
d.Serve as decorative trim
Giải thích
A valley collects runoff from two intersecting planes, so metal valley flashing forms a durable, watertight channel to carry that concentrated flow off the roof. It is not primarily a fastener, a vent, or decoration; those roles are served by other components.
Trích dẫn luật: 2025 CA Residential Code §R905.2.8Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- On a roof slope of 4:12 or greater covered with asphalt shingles, the underlayment must consist of at least:
- The MINIMUM roof slope on which asphalt shingles may be installed (with a doubled underlayment) is:
- A simple gable roof has two identical planes, each measuring 40 ft along the ridge by 18 ft up the slope. How many roofing squares of material cover the roof (before waste)?
- A drip edge at the eaves and rakes of a shingle roof functions primarily to:
- A roof has a total surface area of 2,000 square feet. Adding a 15% allowance for waste, hips, and starter courses, how many roofing squares should be ordered?
- The R-value of an insulation material is a measure of its:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra