Core TradesCâu 152 / 700
The MINIMUM roof slope on which asphalt shingles may be installed (with a doubled underlayment) is:
a.1:12
b.3:12
c.4:12
d.2:12
Giải thích
Asphalt shingles may be applied on slopes as low as 2:12, but only with a doubled underlayment because water drains slowly and can back up. A 1:12 slope is too flat for shingles and requires a low-slope membrane roof. 3:12 and 4:12 are valid but are not the minimum.
Trích dẫn luật: 2025 CA Residential Code §R905.2.2Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Without a booster fan, the MAXIMUM developed length of a residential clothes-dryer exhaust duct (before deductions for fittings) is generally:
- A secondary condensate drain pan or overflow provision under a cooling coil is required primarily to:
- On a roof slope of 4:12 or greater covered with asphalt shingles, the underlayment must consist of at least:
- A simple gable roof has two identical planes, each measuring 40 ft along the ridge by 18 ft up the slope. How many roofing squares of material cover the roof (before waste)?
- In an open valley on a shingle roof, metal valley flashing is installed primarily to:
- A drip edge at the eaves and rakes of a shingle roof functions primarily to:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra