Core TradesCâu 161 / 700
A continuous water-resistive barrier (building paper or house wrap) installed behind exterior cladding functions primarily to:
a.Add thermal insulation value to the wall
b.Provide a drainage plane that sheds incidental water and protects the sheathing
c.Add structural shear strength to the wall
d.Block sound transmission through the wall
Giải thích
The water-resistive barrier creates a continuous drainage plane so any water that gets past the cladding runs down and out rather than soaking the sheathing and framing. It provides negligible insulation, no structural strength, and little sound control; those come from other assemblies.
Trích dẫn luật: 2025 CA Residential Code §R703.2Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- In a heating-dominated (cold-winter) climate, a vapor retarder in an exterior wall is generally installed on which side of the insulation?
- Under current California Energy Code prescriptive requirements, wood-framed ceiling/attic insulation in most climate zones must reach a MINIMUM of about:
- A wall uses R-15 cavity batt insulation plus R-6 continuous exterior rigid insulation. Ignoring framing and air films, what is the combined nominal thermal resistance of these two insulation layers?
- Structural fill placed under a building slab is typically required to be compacted to a MINIMUM relative compaction of about:
- An excavation for a basement measures 30 ft long, 20 ft wide, and 3 ft deep. How many bank cubic yards of soil are removed?
- In construction surveying, a 'benchmark' is BEST described as:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra