Core TradesCâu 164 / 700
In construction surveying, a 'benchmark' is BEST described as:
a.A fixed reference point of known elevation used to establish grades and levels
b.The property corner between two lots
c.The highest point along a graded slope
d.The centerline of an access road
Giải thích
A benchmark is a permanent, fixed point whose exact elevation is known; surveyors reference it to set finished grades and building elevations. A property corner is a horizontal boundary marker, not an elevation reference, and neither a slope high point nor a road centerline serves as the datum for elevations.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A continuous water-resistive barrier (building paper or house wrap) installed behind exterior cladding functions primarily to:
- Structural fill placed under a building slab is typically required to be compacted to a MINIMUM relative compaction of about:
- An excavation for a basement measures 30 ft long, 20 ft wide, and 3 ft deep. How many bank cubic yards of soil are removed?
- A contractor must haul away 100 bank cubic yards (in-place volume) of soil that has a swell factor of 25%. What loose volume must the trucks carry?
- Holding cement content and curing constant, which change to a concrete mix will generally produce the HIGHEST compressive strength?
- Air-entraining admixtures are added to concrete PRIMARILY to improve resistance to:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra