Core TradesCâu 166 / 700
Holding cement content and curing constant, which change to a concrete mix will generally produce the HIGHEST compressive strength?
a.Lowering the water-to-cement ratio
b.Adding more mixing water for easier placement
c.Increasing the slump
d.Using rounded aggregate instead of angular aggregate
Giải thích
Compressive strength is governed mainly by the water-to-cement ratio; lowering it produces a denser, stronger paste. Adding water or increasing slump raises the water-to-cement ratio and weakens the concrete. Aggregate shape affects workability but is not the primary strength driver.
Trích dẫn luật: 2025 CA Building Code, Chapter 19 (Concrete) per ACI 318Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- An excavation for a basement measures 30 ft long, 20 ft wide, and 3 ft deep. How many bank cubic yards of soil are removed?
- In construction surveying, a 'benchmark' is BEST described as:
- A contractor must haul away 100 bank cubic yards (in-place volume) of soil that has a swell factor of 25%. What loose volume must the trucks carry?
- Air-entraining admixtures are added to concrete PRIMARILY to improve resistance to:
- A driveway slab measures 24 ft by 30 ft and is 4 inches thick. Approximately how many cubic yards of concrete are required (no waste allowance)?
- For typical residential foundations in a moderate weathering region, what is a common MINIMUM specified 28-day compressive strength for the concrete?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra