Finish TradesCâu 265 / 700
Batt insulation is installed in a 2x6 wall cavity behind drywall. To achieve its rated R-value, the batt must be:
a.Compressed tightly to fit any thickness
b.Left with large gaps around wiring for airflow
c.Installed at full loft, cut and fitted around obstructions without compression or voids
d.Stapled only at the very top so it hangs freely
Giải thích
Insulation performs at its rated R-value only when installed to full thickness (loft) and carefully fitted around wiring, boxes, and pipes without compression or gaps. Compressing it lowers R-value, gaps create thermal bypass, and loose hanging leaves voids and sagging.
Trích dẫn luật: 2025 CA Energy CodeLuyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A room's window area is being checked for natural light. A common code benchmark for required glazing (natural light) in a habitable room is a glazed area of at least ____ of the floor area of the room.
- A window unit has a glazed opening 4 feet wide by 5 feet tall in a room with 250 square feet of floor area. If the light requirement is 8 percent of floor area, does this single window meet it?
- When installing a skylight on a sloped roof, the head and side flashing should be integrated with the roofing so that:
- A recessed ceiling light fixture is being covered by attic insulation as part of the finish. To avoid a fire hazard, the fixture must be:
- A new landscape irrigation system connects to the potable water supply. To protect drinking water from contamination, the system must include:
- On a residential site, finish grading around the building should generally slope AWAY from the foundation. A common minimum is a fall of about 6 inches within the first:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra