Finish TradesCâu 274 / 700
In tile setting, ANSI standards distinguish thinset types. A latex/polymer-modified thinset (ANSI A118.4) is generally chosen over unmodified thinset (A118.1) when:
a.The tile is very small and the joints are wide
b.Only a dry, low-stress interior floor is involved
c.Higher bond strength and some flexibility are needed, such as for large tile, some substrates, or wet areas
d.Cost is the only consideration
Giải thích
Modified thinset (A118.4) adds bond strength and flexibility, useful for large-format tile, demanding substrates, and wet or exterior settings; unmodified (A118.1) suits basic interior work and is sometimes required under certain membranes. Small tile with wide joints, dry low-stress floors, and cost alone do not drive the modified choice.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- An elastomeric coating is applied over hairline-cracked stucco. Its key advantage over ordinary flat paint is that it:
- Why do painters often 'box' (combine and mix together) multiple gallons of the same tinted paint color before starting a large wall?
- An intumescent (fire-resistive) coating is specified on structural steel. It provides its fire protection MAINLY by:
- Cement backer board (cementitious backer unit) joints on a wall are treated before tiling by:
- Porous natural stone tile has been installed and grouted. Applying a penetrating (impregnating) sealer to the stone MAINLY serves to:
- On a large-format porcelain tile floor, lippage (one tile edge higher than the neighbor) is a common complaint. Which practice BEST minimizes lippage?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra