Finish TradesCâu 275 / 700
Cement backer board (cementitious backer unit) joints on a wall are treated before tiling by:
a.Leaving the joints open and bare
b.Filling with drywall joint compound and paper tape
c.Caulking the joints with silicone only
d.Bedding alkali-resistant fiberglass mesh tape in thinset over the joint
Giải thích
Backer board joints are reinforced with alkali-resistant fiberglass mesh tape set in thinset mortar, matching the wet-durable materials of a tile assembly. Bare joints crack, and drywall compound/paper tape and plain silicone are not moisture-durable substrates for tile.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Why do painters often 'box' (combine and mix together) multiple gallons of the same tinted paint color before starting a large wall?
- An intumescent (fire-resistive) coating is specified on structural steel. It provides its fire protection MAINLY by:
- In tile setting, ANSI standards distinguish thinset types. A latex/polymer-modified thinset (ANSI A118.4) is generally chosen over unmodified thinset (A118.1) when:
- Porous natural stone tile has been installed and grouted. Applying a penetrating (impregnating) sealer to the stone MAINLY serves to:
- On a large-format porcelain tile floor, lippage (one tile edge higher than the neighbor) is a common complaint. Which practice BEST minimizes lippage?
- A vinyl composition tile (VCT) floor is being installed and will be maintained with floor finish. The subfloor must be smooth because:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra