Finish TradesCâu 278 / 700
A vinyl composition tile (VCT) floor is being installed and will be maintained with floor finish. The subfloor must be smooth because:
a.VCT is thick enough to hide any bump
b.Thin VCT telegraphs (shows) subfloor irregularities and holes through the surface
c.The finish coat fills all holes
d.Roughness improves adhesion of VCT
Giải thích
Because VCT is thin, any bumps, gouges, or holes in the subfloor telegraph through and show in the finished floor, so the substrate must be patched smooth and clean. VCT does not hide bumps, floor finish does not fill substrate holes, and roughness harms both appearance and adhesion.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Cement backer board (cementitious backer unit) joints on a wall are treated before tiling by:
- Porous natural stone tile has been installed and grouted. Applying a penetrating (impregnating) sealer to the stone MAINLY serves to:
- On a large-format porcelain tile floor, lippage (one tile edge higher than the neighbor) is a common complaint. Which practice BEST minimizes lippage?
- Solid hardwood strip flooring installed over a wood subfloor at grade needs an expansion allowance. At the walls, the installer should:
- Frameless (European-style) cabinets differ from face-frame cabinets MAINLY in that:
- Under CALGreen, composite wood used in interior casework, such as particleboard cabinet boxes, must meet formaldehyde emission limits. This requirement is set MAINLY to:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra