Finish TradesCâu 281 / 700
Under CALGreen, composite wood used in interior casework, such as particleboard cabinet boxes, must meet formaldehyde emission limits. This requirement is set MAINLY to:
a.Increase the strength of the cabinets
b.Lower the cost of the cabinets
c.Protect indoor air quality and occupant health
d.Make the cabinets waterproof
Giải thích
CALGreen caps formaldehyde emissions from composite wood products (matching CARB standards) to protect indoor air quality and occupant health. The limits are about emissions, not structural strength, cost, or water resistance.
Trích dẫn luật: 2025 CALGreen §4.504Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A vinyl composition tile (VCT) floor is being installed and will be maintained with floor finish. The subfloor must be smooth because:
- Solid hardwood strip flooring installed over a wood subfloor at grade needs an expansion allowance. At the walls, the installer should:
- Frameless (European-style) cabinets differ from face-frame cabinets MAINLY in that:
- In a bathroom that will receive paint (not tile), which gypsum board is a better choice for the walls and ceiling than standard board?
- On the interior of an attached garage, gypsum board fasteners into the ceiling of a garage with habitable space above are spaced to help the assembly perform. The garage-side board must generally be at least 5/8-inch Type X when there is living space above, MAINLY to:
- In a suspended acoustical ceiling grid, the perimeter of the grid is supported by wall angle (edge molding). Where main runners and cross tees are cut at the walls, they should:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra