Framing & StructuralCâu 357 / 700
Where three-coat stucco terminates at a window, door, or dissimilar material, what accessory provides a clean, sealed edge?
a.A weep screed only
b.A rafter tie
c.A drip edge on the roof
d.A casing bead (plaster stop) at the termination
Giải thích
A casing bead, or plaster stop, gives stucco a finished, gauged edge where it terminates against openings or other materials and creates a location to seal against water intrusion. A weep screed is used at the wall base, a rafter tie is a roof member, and a roof drip edge is unrelated to a wall stucco termination.
Trích dẫn luật: 2025 CA Residential Code §R703.7.3Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- In traditional three-coat stucco over metal lath, the total nominal thickness is about 7/8 inch. Which sequence of coats builds that thickness?
- Fiber-cement lap siding is installed on a wood-framed wall. What clearance is generally required between the bottom edge of the siding and the finished grade or a roof surface below it?
- Why is vinyl siding fastened so that the panels can move slightly (nails not driven tight) rather than pinned firmly?
- When self-furring metal lath is used for stucco, what does the 'self-furring' feature accomplish?
- A deck ledger is attached to the house rim joist. Which fastening is generally ACCEPTABLE, and which is NOT?
- What flashing detail BEST protects the house at a deck ledger connection?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra