Finish TradesCâu 420 / 700
When installing natural stone tile such as green marble, why is the choice of setting mortar and installation method especially important compared with ordinary ceramic tile?
a.Stone is always heavier and needs no bonding
b.Stone never absorbs moisture
c.Some stones are moisture-sensitive and can warp, stain, or discolor with the wrong mortar
d.Stone tiles are always thinner than ceramic
Giải thích
Certain natural stones are moisture-sensitive and can warp, spot, or discolor if set with a mortar that holds too much water, so a compatible setting material and method are critical. Stone does absorb moisture, is not universally heavier or thinner, and always needs proper bonding.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- When hanging gypsum board on a ceiling with framing spaced 16 inches on center, which practice BEST minimizes sagging over time?
- In three-coat interior plaster over metal lath, what is the correct order of the coats from the lath outward?
- When specifying architectural cabinetry, what does specifying a particular grade under the North American Architectural Woodwork Standards primarily control?
- When applying an oil-based stain and clear topcoat to interior wood trim, why should oily rags be spread out or placed in a sealed metal container after use?
- In a tub or shower area that will receive tile, which type of gypsum panel product is UNSUITABLE as the tile backing directly exposed to wet conditions?
- When installing resilient sheet vinyl flooring over a concrete slab, what condition MOST commonly causes adhesive failure and bubbling?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra