Finish TradesCâu 423 / 700
When installing resilient sheet vinyl flooring over a concrete slab, what condition MOST commonly causes adhesive failure and bubbling?
a.Slab that is too smooth
b.Excessive moisture vapor emission or high pH at the slab surface
c.Room temperature that is slightly cool
d.Using a notched trowel to spread adhesive
Giải thích
High moisture vapor emission or elevated surface pH in the slab breaks down flooring adhesive and causes bubbling and bond failure. A smooth slab, a slightly cool room, and using a notched trowel are normal conditions or correct practices, not the primary cause of adhesive failure.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- When installing natural stone tile such as green marble, why is the choice of setting mortar and installation method especially important compared with ordinary ceramic tile?
- When applying an oil-based stain and clear topcoat to interior wood trim, why should oily rags be spread out or placed in a sealed metal container after use?
- In a tub or shower area that will receive tile, which type of gypsum panel product is UNSUITABLE as the tile backing directly exposed to wet conditions?
- Why should interior solid-wood doors and wood trim be acclimated to the building's interior conditions before installation?
- Under CALGreen water-efficiency provisions, selecting drought-tolerant plants and efficient irrigation for landscaping primarily supports which goal?
- When painting exterior wood siding in direct summer sun, why is it BEST to avoid applying latex paint to a hot, sun-baked surface?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra