Finish TradesCâu 431 / 700
When installing a prehung exterior entry door, which step is MOST important to ensure the door operates correctly and seals against weather?
a.Fastening the jamb tight to the framing with no shims
b.Plumbing, squaring, and shimming the jamb so the reveal is even before final fastening
c.Trimming the door slab narrower than the opening
d.Leaving the threshold unsealed for drainage
Giải thích
A prehung door must be set plumb, square, and shimmed so the reveal around the slab is uniform, which lets it latch, swing, and weatherseal properly. Fastening tight without shims racks the jamb, trimming the slab narrow ruins the seal, and leaving the threshold unsealed invites water intrusion.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- When grouting ceramic wall tile with a sanded cement grout, why should the installer avoid using sanded grout in very narrow joints?
- In finish carpentry, what is the PRIMARY reason to leave a small expansion gap around the perimeter of a floating laminate or engineered wood floor?
- For 1/2-inch gypsum board applied to ceiling framing spaced 16 inches on center and receiving a hand-applied water-based texture, which fastening consideration BEST prevents sag?
- A skylight is being selected for a conditioned space. Under the energy code, which two rated properties are MOST directly regulated to limit heat gain and loss through that skylight?
- When installing kitchen base cabinets on a floor that is slightly out of level, which practice produces the BEST finished result?
- Before finish painting new interior woodwork that contains knots in the wood, why is a stain-blocking primer recommended over the knots?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra