Finish TradesCâu 433 / 700
When installing kitchen base cabinets on a floor that is slightly out of level, which practice produces the BEST finished result?
a.Cutting the countertop to follow the slope of the floor
b.Setting all cabinets tight to the floor and ignoring level
c.Screwing cabinets to the wall wherever a stud happens to fall, level or not
d.Shimming the cabinets to a level line and scribing the toe kick or filler to the floor
Giải thích
Cabinets should be shimmed to a consistent level line so doors, drawers, and countertops align, with the toe kick or fillers scribed to the uneven floor to hide the gap. Cutting the countertop to the slope, ignoring level, or fastening without leveling all yield misaligned, poorly operating casework.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- For 1/2-inch gypsum board applied to ceiling framing spaced 16 inches on center and receiving a hand-applied water-based texture, which fastening consideration BEST prevents sag?
- When installing a prehung exterior entry door, which step is MOST important to ensure the door operates correctly and seals against weather?
- A skylight is being selected for a conditioned space. Under the energy code, which two rated properties are MOST directly regulated to limit heat gain and loss through that skylight?
- Before finish painting new interior woodwork that contains knots in the wood, why is a stain-blocking primer recommended over the knots?
- Under CALGreen, adhesives, sealants, and caulks used indoors must meet limits on which characteristic to protect occupant health?
- Under CALGreen, interior nonflat architectural coatings applied inside a building generally must not exceed which volatile organic compound (VOC) limit?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra