Finish TradesCâu 435 / 700
Under CALGreen, adhesives, sealants, and caulks used indoors must meet limits on which characteristic to protect occupant health?
a.Bond strength
b.Volatile organic compound (VOC) content
c.Cure color
d.Container size
Giải thích
CALGreen sets VOC content limits for interior adhesives, sealants, and caulks to reduce harmful emissions and protect indoor air quality. Bond strength, cure color, and container size are product characteristics unrelated to the emissions limits CALGreen imposes.
Trích dẫn luật: CALGreen Title 24 Part 11Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A skylight is being selected for a conditioned space. Under the energy code, which two rated properties are MOST directly regulated to limit heat gain and loss through that skylight?
- When installing kitchen base cabinets on a floor that is slightly out of level, which practice produces the BEST finished result?
- Before finish painting new interior woodwork that contains knots in the wood, why is a stain-blocking primer recommended over the knots?
- Under CALGreen, interior nonflat architectural coatings applied inside a building generally must not exceed which volatile organic compound (VOC) limit?
- CALGreen requires that a specified percentage of installed resilient flooring meet an approved low-emission (CDPH) testing standard. This requirement is intended MAINLY to protect what?
- In a large ceramic tile installation, movement (expansion) joints are important MAINLY to accomplish what?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra