Core TradesCâu 47 / 700
A roof has 3,150 square feet of surface to cover. Including a 10 percent allowance for waste and hips, how many roofing squares of material should be ordered?
a.About 31.5 squares
b.About 33 squares
c.About 35 squares
d.About 38 squares
Giải thích
One square equals 100 square feet, so 3,150 sq ft = 31.5 squares; adding 10 percent gives 31.5 x 1.10 = about 34.7, rounded up to 35 squares. Ordering 31.5 or 33 ignores or underestimates waste.
Trích dẫn luật: 2025 CA Residential Code (CRC) R905 (Roof Coverings)Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Where an ice barrier is required, it must extend from the eave edge to a point at least how far inside the exterior wall line of the building?
- For asphalt shingles installed on slopes between 2:12 and 4:12, the underlayment must be applied as:
- An enclosed attic has 1,500 square feet of area. Using the 1/150 rule with no vapor retarder, what MINIMUM net free ventilating area is required?
- At the rake (gable) edge of a shingle roof, the drip edge should be installed:
- In a basic (non-high-wind) zone, standard asphalt shingles are typically fastened with a MINIMUM of how many nails per shingle?
- A simple gable roof covers a building 24 feet by 40 feet in plan. At a 6:12 pitch (slope factor 1.118), what is the approximate total roof surface area?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra