Core TradesCâu 50 / 700
A simple gable roof covers a building 24 feet by 40 feet in plan. At a 6:12 pitch (slope factor 1.118), what is the approximate total roof surface area?
a.About 960 square feet
b.About 1,000 square feet
c.About 1,040 square feet
d.About 1,073 square feet
Giải thích
The plan footprint is 24 x 40 = 960 sq ft; multiplying by the 6:12 slope factor of 1.118 gives about 1,073 sq ft of actual sloped roof area. Using 960 ignores the slope, and the middle values understate the correction.
Trích dẫn luật: 2025 CA Residential Code (CRC) Chapter 8 (Roof-Ceiling Construction)Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A roof has 3,150 square feet of surface to cover. Including a 10 percent allowance for waste and hips, how many roofing squares of material should be ordered?
- At the rake (gable) edge of a shingle roof, the drip edge should be installed:
- In a basic (non-high-wind) zone, standard asphalt shingles are typically fastened with a MINIMUM of how many nails per shingle?
- In differential leveling, a 'backsight' reading is taken on:
- A 'balanced' grading design PRIMARILY seeks to:
- Which field method determines in-place soil density by excavating a small hole and replacing the soil with a calibrated sand from a known-volume cone?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra