Core TradesCâu 67 / 700
CALCULATION: A slab-on-grade measures 30 ft by 24 ft and is 5 inches thick. How many cubic yards of concrete are required, before adding waste?
a.Approximately 8.9 cubic yards
b.Approximately 11.1 cubic yards
c.Approximately 13.3 cubic yards
d.Approximately 15.0 cubic yards
Giải thích
Volume = 30 x 24 x (5/12) = 720 x 0.4167 = 300 cubic feet. Divide by 27 cubic feet per cubic yard: 300 / 27 = 11.1 cubic yards. Answer 8.9 uses 4 inches; 13.3 uses 6 inches; 15.0 overstates the area.
Trích dẫn luật: 2025 CA Building Code, Chapter 19 (Concrete)Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Fresh concrete is being placed into a tall wall form at a high rate on a cool day. The crew is concerned about lateral pressure on the forms. Which factor will MOST increase the lateral concrete pressure on the formwork?
- In a post-tensioned slab, the primary function of the tendons is to:
- A below-grade concrete basement wall shows persistent damp spots and mineral staining on the interior. The MOST effective long-term remedy is to:
- CALCULATION: A continuous footing is 60 feet long, 20 inches wide, and 12 inches deep. Approximately how many cubic yards of concrete does it require?
- CALCULATION: A rectangular column is 18 in by 18 in in cross-section and 10 feet tall. Ignoring reinforcement, how many cubic yards of concrete does it contain?
- A concrete supplier delivers a load with a measured slump much higher than ordered. Before rejecting or accepting, the BEST assumption about the likely cause and its effect is:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra