SafetyCâu 684 / 700
A mobile crane's load chart shows its rated capacity decreasing as the load is moved farther from the crane. What happens to the crane's safe rated capacity as the operating RADIUS increases?
a.It stays the same because the crane's weight does not change
b.It increases because leverage helps the crane
c.It decreases, because a longer radius creates a greater tipping/overturning moment
d.It depends only on wind speed, not radius
Giải thích
Correct: as the horizontal distance (radius) from the center of rotation to the load increases, the overturning moment grows, so the crane can safely lift less. That is why load charts list smaller capacities at longer radii. Capacity is not constant, and a longer radius hurts rather than helps stability. Wind is a separate factor and does not replace the radius-capacity relationship.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Under California outdoor heat illness rules, how much drinking water must an employer be able to provide per employee for a typical shift, at minimum?
- When shade must be provided for a crew, roughly how much shade area does the heat standard expect the employer to make available?
- A crew includes several new hires during a heat wave. What does the heat standard expect regarding acclimatization for workers newly assigned to a high-heat area?
- A two-leg bridle sling lifts a 4,000-pound load. Each leg makes a 30-degree angle with the horizontal. Using tension per leg = (load / number of legs) / sin(angle), what is the tension in EACH leg?
- A crane will operate where the boom or load could approach an overhead power line carrying less than 50 kV. What MINIMUM clearance is generally required between the equipment and the energized line?
- During a pre-lift inspection, which condition MOST clearly requires removing a synthetic web sling from service immediately?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra