Mạch nhánh & Đi dâyCâu 188 / 521
A single unbroken conductor passes straight through a box without being spliced or terminated. For box fill, it is counted as how many conductors?
a.Two
b.Zero
c.One-half
d.One
Giải thích
Per 314.16(B)(1), each conductor that runs through the box without splice or termination is counted once. It is not exempt (zero) and not doubled; a conductor is only counted twice when it is looped unbroken with a length of at least twice the minimum required for free conductors.
Trích dẫn luật: 2023 NEC §314.16(B)(1)Luyện miễn phí toàn bộ 521 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A box contains three internal cable clamps. In the box-fill calculation, how many volume allowances do the clamps require in total?
- A box has four 12 AWG equipment grounding conductors entering it. How are they counted in the box-fill calculation?
- A box contains five 12 AWG current-carrying conductors, one 12 AWG equipment grounding conductor, one internal cable clamp, and one switch on a yoke (all conductors 12 AWG). What total box volume is required?
- How are conductors that both originate and terminate within the box (such as short pigtails or jumpers) treated in a box-fill calculation?
- Per Chapter 9, Table 1, what is the maximum permitted conduit fill percentage when three or more conductors are installed in a raceway?
- Per Chapter 9, Table 1, what is the maximum permitted fill percentage when exactly two conductors are installed in a conduit?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-10 Electrical Trade Examination · Quy trình kiểm tra