Lập kế hoạch & Dự toánCâu 362 / 521
A dwelling calculated load totals 24,000 VA on a 240 V, single-phase service. What is the minimum service ampacity this load demands?
a.60 A
b.90 A
c.100 A
d.125 A
Giải thích
Amps = VA ÷ volts = 24,000 ÷ 240 = 100 A. Dividing by 120 or using the wrong voltage produces the other values, so the calculated demand is 100 A.
Luyện miễn phí toàn bộ 521 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- The combined general lighting, small-appliance, and laundry load of a dwelling is 9,000 VA. After applying the standard-method demand factors, what is the net load?
- Using Table 220.55, Column C, what is the demand load for a single 12 kW household electric range?
- A household electric clothes dryer is rated 4.5 kW. What value is used in the service load calculation?
- Using the optional method, a dwelling's other loads (excluding heating/AC) total 30 kVA. What is the demand after applying the optional-method demand factors?
- On an electrical floor plan, the switch symbol marked with a subscript 3 (S3) indicates what device?
- How often is a new edition of the National Electrical Code, on which the California Electrical Code is based, normally published?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-10 Electrical Trade Examination · Quy trình kiểm tra