Load & DesignCâu 1 / 110
In residential load calculations, what does an ACCA Manual J procedure primarily determine?
a.The size and gauge of supply ductwork
b.The heating and cooling loads of a building based on its construction and climate
c.The refrigerant charge required for the condenser
d.The electrical service size for the panel
Giải thích
Manual J is the industry-standard residential load calculation method. It estimates the sensible and latent heating and cooling loads by accounting for construction, insulation, windows, orientation, infiltration, and local design temperatures. Equipment is then selected to match those calculated loads.
Trích dẫn luật: California Energy Code (Title 24)Luyện miễn phí toàn bộ 110 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- One ton of cooling capacity is equal to how many BTU per hour?
- A common rule-of-thumb airflow value for a residential cooling system is approximately how many CFM per ton?
- A 4-ton air-conditioning system is designed at 400 CFM per ton. What total supply airflow is required?
- The sensible heat formula uses which constant when air volume is in CFM and temperature difference is in degrees F?
- Using the sensible heat formula, how much sensible heat is removed when 1,200 CFM of air is cooled through a 20 degree F temperature drop?
- What does ACCA Manual D provide guidance for?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-20 Warm-Air HVAC Trade Exam · Quy trình kiểm tra