Safety & CodesCâu 105 / 110
Before working inside an energized electrical panel is unavoidable, a technician should do what to reduce shock risk?
a.Wear cotton gloves only
b.Use appropriate insulated tools and PPE and follow safe work practices
c.Wet the work area
d.Remove all covers permanently
Giải thích
When de-energizing is not feasible, Cal/OSHA safe work practices call for insulated tools, appropriate PPE, and careful technique to reduce shock and arc-flash risk. Whenever possible, the circuit should be de-energized and locked out first. Working live is a last resort with added precautions.
Trích dẫn luật: Cal/OSHA Title 8Luyện miễn phí toàn bộ 110 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Under the California Plumbing Code, condensate waste from HVAC equipment is generally treated as what?
- Personal protective equipment (PPE) commonly required when brazing refrigerant lines includes what?
- Why is a carbon monoxide alarm recommended or required in dwellings with fuel-burning appliances?
- Adequate ventilation air in occupied buildings is important because it does what?
- A furnace's high-limit (temperature limit) switch protects the equipment by doing what?
- When entering a permit-required confined space, atmospheric testing should be performed to check for what?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-20 Warm-Air HVAC Trade Exam · Quy trình kiểm tra