InstallationCâu 50 / 110
What is the purpose of a filter drier installed in the liquid line?
a.To meter refrigerant
b.To insulate the line
c.To remove moisture and trap contaminants circulating in the refrigerant
d.To increase suction pressure
Giải thích
A liquid-line filter drier adsorbs moisture and captures particulate contaminants, protecting the metering device and compressor. It is typically replaced whenever the system is opened for major service. A saturated drier can restrict flow and should be changed.
Luyện miễn phí toàn bộ 110 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- What is the recommended practice for supporting horizontal refrigerant and drain lines?
- Before releasing refrigerant charge into a newly installed line set, the system should be tested and then processed how?
- A gas furnace flue must terminate where?
- When connecting line-voltage power to an air conditioner, the disconnect switch must be located where?
- Return air for a gas furnace must not be taken from which location?
- When mounting an outdoor condenser on a slab, the pad should be installed how?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-20 Warm-Air HVAC Trade Exam · Quy trình kiểm tra