Service & TroubleshootingCâu 76 / 110
A start capacitor differs from a run capacitor in that it is designed to do what?
a.Stay energized continuously
b.Regulate refrigerant flow
c.Provide a high momentary boost of starting torque, then drop out of the circuit
d.Filter the supply air
Giải thích
A start capacitor provides a large capacitance boost to start a motor under load and is switched out by a relay once the motor is up to speed. It is not rated for continuous duty. It is used with hard-start kits and certain compressor and motor designs.
Luyện miễn phí toàn bộ 110 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- What is the primary function of a run capacitor on a single-phase motor?
- A contactor in an air-conditioning condenser performs what function?
- A typical low-voltage control (thermostat) circuit in residential HVAC operates at what voltage?
- If a condenser fan motor fails while the compressor keeps running, what symptom is most likely?
- Low airflow across an evaporator coil during cooling most commonly causes what?
- SEER (or SEER2) is a rating that describes what?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-20 Warm-Air HVAC Trade Exam · Quy trình kiểm tra